Platinum™ IP3
Installation and Operation Manual
Module LEDs
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 300
Output Module LEDs
Output 1 - Output 6
LEDs OUTPUT 1 to OUTPUT 6 flash to indicate abnormal hardware status in the slot. Note that they are
NOT turning on/off at the same time.
Output 7, Output 8, Output 9
LED Outputs 7, 8, 9
OUTPUT
7
OUTPUT
8
OUTPUT
9
Description
OFF
ON
OFF
Front Module is SD (270Mbps) only.
Works only with specific Back Modules designed for the Platinum
system
ON
ON
OFF
Front Module is SD/HD/3G.
Works only with specific Back Modules designed for the Platinum
system
OFF
OFF
ON
Front Module is SD (270Mbps) only.
Works only with specific Back Modules designed for the IP3 system
ON
OFF
ON
Front Module is SD/HD/3G.
Works only with specific Back Modules designed for the IP3 system
Output 13, Output 14, Output 15, Output 16
These LED outputs indicate Back Module types.
Table 133:
LED Outputs 13, 15, 15, 16
OUTPUT 13 OUTPUT 14 OUTPUT 15 OUTPUT 16 BM Types
ON
ON
ON
ON
No Back Module installed at the back of this
slot, OR
Front Module not correctly mated with Back
Module
OFF
OFF
OFF
ON
Back Module contains 16x HD-BNC connectors
ON
OFF
OFF
ON
Back Module contains 8x SFP sockets
OFF
ON
OFF
ON
Back Module contains 2x DensiShield sockets
and 8x HD-BNC connectors
