Platinum™ IP3
Installation and Operation Manual
Module LEDs
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 299
Input Module LEDs
Input 1 and Input 2
INPUT 1 and INPUT 2 flash to indicate abnormal hardware status in the slot. Note that they are NOT
turning on/off at the same time.
Input 3, Input 4, Input 5
These LED inputs indicate module configuration.
Table 131:
LED Inputs 3, 4, 5
INPUT
3
INPUT
4
INPUT
5
Description
OFF
ON
OFF
Front Module is SD (270Mbps) only.
Works only with specific Back Modules designed for the Platinum
system
ON
ON
OFF
Front Module is SD/HD/3G.
Works only with specific Back Modules designed for the Platinum
system
OFF
OFF
ON
Front Module is SD (270Mbps) only.
Works only with specific Back Modules designed for the IP3 system
ON
OFF
ON
Front Module is SD/HD/3G.
Works only with specific Back Modules designed for the Platinum
system
Input 6, Input 7, Input 8, Input 9
These LED inputs indicate Back Module types.
Table 132:
LED Inputs 6, 7, 8, 9
INPUT
6
INPUT 7
INPUT
8
INPUT
9
Description
ON
ON
ON
ON
No Back Module installed at the back of this slot, OR
Front Module not correctly mated with Back Module
OFF
OFF
OFF
OFF
Back Module contains 9x HD-BNC connectors
ON
OFF
OFF
OFF
Back Module contains 1x DensiShield socket and 1x HD-BNC
connector
OFF
ON
OFF
OFF
Back Module contains 5x SFP sockets
ON
ON
OFF
OFF
Back Module contains 8x BNC connectors
