Imagine HDX-6800+B4, Инструкция по установке и эксплуатации

Страница: 65 / 96

HDX6800
+
B2/C2 and HDX6800
+
B4/C4 Installation and Operation Manual 51
Chapter 3: Operation
[RO] Out Ch1B Status Reports the status (peak/silence/normal) of
output channel 1B
• Peak
• Silence
• Normal
[RO] Out Ch2A Status Reports the status (peak/silence/normal) of
output channel 2A
• Peak
• Silence
• Normal
[RO] Out Ch2B Status Reports the status (peak/silence/normal) of
output channel 2B
• Peak
• Silence
• Normal
[RO] Out Ch3A Status** Reports the status (peak/silence/normal) of
output channel 3A
• Peak
• Silence
• Normal
[RO] Out Ch3B Status** Reports the status (peak/silence/normal) of
output channel 3B
• Peak
• Silence
• Normal
[RO] Out Ch4A Status** Reports the status (peak/silence/normal) of
output channel 4A
• Peak
• Silence
• Normal
[RO] Out Ch4B Status** Reports the status (peak/silence/normal) of
output channel 4B
• Peak
• Silence
• Normal
1 Use Non-PCM channel format when passing compressed audio such as Dolby-E.
2 These read-only parameters indicate the audio and video timing relationship, as indicated in the
associated audio group control packet (see SMPTE 299M section 6.2.4). In regard to the embedded
audio in the HD stream, positive values indicate that the video leads the audio, while negative values
indicate that the audio leads the video. Note that these parameters only notify the network if there is a
change in value; typically, these values do not change.
Table 3-6. Parameter Options (Continued)
Bank,
Rotary
Switch
Parameter Name Function Options