Imagine communications Selenio BNP 2xr Скачать руководство пользователя страница 74

Страница: 74 / 278

Selenio

BNP User Guide, Release 3.7.1

System Configuration

- Messaging System Configuration

Click

Apply

to save and apply the settings.

Table 44.

Zone Name and Status - Advanced Messaging

Field

Description

Zone Name

This field is common to both Operator and Advanced tabs.
Up to ten Messaging Zones may be created; these may be a mix of EAS,

Operator, or Advanced zones.

Start Time

Read-only field. Displays the day, date, and time that the crawl has or will

begin.

Remaining Time

Read-only field. If a limit was placed on the duration of the alert, the time

remaining is displayed here.

Event Duration

Read-only field. Displays how long the event is to take place.

Current Status

This field is read-only and will display one of the following values:

•

Enable

•

Operator Messaging Loaded

•

Operator Messaging Text On

•

Advanced Messaging Loaded

• Advanced Messaging On
•

Scheduled

See Table 31 on page 61 for a complete description of these values.

Next Start Time

Read-only field. Displays the time that the next round of messaging will

begin.

Overlay Image

Read-only field. Displays the status of the graphic and/or text overlay.

Possible values are:

•

Complete

: An image or text file has been uploaded to the BNP.

•

None

: No image or text file has been uploaded to the BNP.

Содержание Selenio BNP 2xr























































































































































































































































































Результаты поиска

Содержание Selenio BNP 2xr

Отзывы:

Похожие инструкции для Selenio BNP 2xr

Бренды по названию

Популярные бренды

Imagine communications Selenio BNP 2xr, Руководство пользователя

Результаты поиска

Содержание Selenio BNP 2xr

Отзывы:

Похожие инструкции для Selenio BNP 2xr

Бренды по названию

Популярные бренды