Imagine communications Selenio 6800 SFS6803+OP+SFS+, Инструкция по установке и эксплуатации

Страница: 15 / 118

1
1
Introduction
Product Description
The SFS6803
+
and OP
+
SFS
+
are audio/video frame synchronizers and processing amplifiers
with SD-SDI digital video input and one genlock reference video input, and four
synchronized and processed SD-SDI outputs with embedded audio.The OP
+
SFS
+
(C)xxD
module has an optional hardware submodule that provides output over fiber in 1 of 17
wavelengths, and the optional submodule on the OP
+
SFS
+
R
+
D receives a fiber input in 1 of
17 wavelengths. These modules provide full video and embedded audio synchronization to a
local station reference signal and allow for clean processing of all signals. The modules
support embedding, de-embedding, and passing of Dolby E
™
metadata, and picture and
sound control through integrated processing amplifiers.
All versions of SFS6803
+
and OP
+
SFS
+
provide video hot switch and I/O delay signals for
separate downstream audio tracking modules.
The basic SFS6803
+
and OP
+
SFS
+
provide SD-SDI video and audio synchronization and
delay, and there are optional upgrades to 1.5G HD-SDI and 3G HD-SDI, including dual-link.
Other optional upgrades add four and eight channels of AES input and output audio to the
module, and add analog inputs or outputs.
Each SFS6803
+
or OP
+
SFS
+
package includes a module-specific breakout cable with
unbalanced (coaxial) audio connectors that expands the number of available connections
beyond what would fit on a standard two-slot back connector. It includes an RS-232/RS-422
serial connector to embed or de-embed metadata. Balanced AES outputs are supported with
SFS6803
+
BD, OP
+
SFS
+
BD, or external baluns.
SFS6803
+
and OP
+
SFS
+
can be operated locally (using card-edge controls); or operated and
monitored remotely with control software applications such as CCS Navigator
™
, HTTP web
browser, or third-party SNMP-based control applications, or CCS-compliant remote control
panels such as NUCLEUS. The module is QSEE™-compliant, so you can monitor a thumbnail
when it is installed in an Ethernet-equipped FR6802
+
QXF or FR6822
+
frame.
The SFS6803
+
and OP
+
SFS
+
back connector requires two frame slots within an FR6802
+
XF,
FR6822
+
, or FR6802
+
QXF frame. The SFS6803
+
AI
+
T, OP
+
SFS
+
AI
+
T, SFS6803
+
AO
+
T, and
OP
+
SFS
+
AO
+
T require three slots within the same frames. There is no backward
compatibility provided for use with 6800/7000 series frames or FR6802
+
DM frames.
SFS6803
+
and OP
+
SFS
+
must be installed in a frame with fans.
Main
Features
All versions of SFS6803
+
and OP
+
SFS
+
include the following features:

Inputs