Imagine communications Selenio 6800 HUC6800, Инструкция по установке и эксплуатации

Страница: 44 / 84

30 HUC6800
+
Installation and Operation Manual
Chapter 3: Operation
Saving, Selecting, and Recalling Saved Aspect Ratios
You can save, select, and recall up to five custom aspect ratios in the
HUC6800
+
and HUC6800
+
C modules.
Saving a Custom Aspect Ratio
To save a custom aspect ratio, follow these steps:
1. Make sure the
ARC H Scale , ARC V Scale , ARC H Offset , and
ARC V Offset parameters have been set.
2. Scroll down to the menu item ARC Preset Save and then select one
of the five aspect ratio preset slots for storage.
3. Wait approximately 2 seconds for the module to process the
command.
Selecting a Saved Custom Aspect Ratio
To select one of the custom saved aspect ratios for the output image,
follow these steps:
1. Scroll to the
ARC Preset Select parameter.
2. Select one of the five saved aspect ratios: Preset1 , Preset2 ,
Preset3 , Preset4, or Preset5 .
3. Wait approximately 2 seconds for the module to process the
command.
Recalling a Saved Custom Aspect Ratio
By selecting the ARC Preset Recall parameter, you can also recall any
built-in standard or custom saved aspect ratio settings without changing
the output image.
The
ARC Preset Recall parameter will overwrite the following custom
aspect ratio parameters: ARC H Scale , ARC V Scale , ARC H Offset ,
and ARC V Offset . If you perform an aspect ratio recall when ARC
Preset Select is set to Custom , the output image aspect ratio will revert
to the recalled aspect ratio.