MCU 4
S0 S1 S2 S3 S4
M
RESERVE
SLAVE
1
2
3
4
0
+
-
G
SOURCE
OUTPUT
INPUT
INDIVIDUAL
1
2
1
2
PAIR
CONSOLE
S0
S1
S2
S3
S4
1
2
3
4
5
6
12
8
11
7
9 10
I/O Port & LED
Packing:
iMageTech MCU4
Wireless Meeting Speakerphone System
Start
iMageTech MCU4 unit
USB cable
USB adapter
Terminal port
(16pin+12pin)
VCS cable set
(Differs according to VCS model)
Step1 : Connect the USB adapter (No.12) to the iMageTech MCU 4 Wireless Meeting Speakerphone System.
Step2 : Press the “Bluetooth Speakerphone pairing button (No.8)” on the back for 3 seconds, and wait until “the Bluetooth connection status indicator
(blue)” rapidly flashes, then it can automatically be mapped to the iMage A1/A2 Bluetooth Conference Speakerphone. Simply pair five sets of
iMage A1/A2 Bluetooth Conference Speakerphones to S0, S1, S2, S3 and S4 in order (make sure that the iMage A1/A2 Bluetooth Conference
Speakerphone is set to “Adpter mode” before pairing).
Step3 : Select audio source (Bluetooth, USB or video mode). You can select Bluetooth to connect mobile devices or USB devices to the computer, or connect
a VCS using dedicated audio cables. If Bluetooth audio source is selected, please pair it using the Bluetooth audio source pairing button (No.10).
1. Power indicator
2. Audio source status indicator
(Bluetooth/blue, USB/red, VCS/none)
3. Bluetooth connection status indicator (Blue)
4. System-reserved port
5. Audio Out (independent audio output)
6. Audio In (connect to Audio Out of the VCS)
7. Audio Out (connect to the Audio In of the
VCS)
8. Bluetooth Speakerphone pairing button (S0,
S1, S2, S3, S4)
9. Console pairing button
10. Bluetooth audio source pairing button
11. Audio source selection switch (video, USB, Bluetooth)
12. USB power
