IMAGENEX 852-GS, Руководство пользователя

Страница: 22 / 34

852-GS Ultra-Miniature Imaging Sonar
Doc No: 430-048-0B Page 22 of 34
3.1.7. File => Auto File Size
RealTime only
Select the file size to be limited to 1
– 4 GB. If enabled, the data file will be logged to the maximum file size
and a new file will be created to continue logging.
3.1.8. File => Convert 81R File to .xyz
Converts an.81R data file to an ASCII text XYZ file. X and Y are the output from a polar to rectangular
conversion, and z is calculated from the Auto Profile settings (see 3.6.9 Profile => Auto Profile). X,Y and Z
values are corrected for pitch and roll. An Open File dialog box is shown and a file is selected, which is
replayed while the XYZ file is generated in the background. RealTime operational mode will stop during this
process.
The XYZ is formatted as dd-mm-yyyy<tab>hh:mm:ss<tab>X<tab>Y<tab>Z<cr><lf>
3.1.9. File => Save Screen
Opens a dialog that allows for the saving of a .BMP file of the current screen.
3.1.10. File => Exit
Writes all settings to the Win881AL.INI file that is kept in the same location as the executable file, and closes
the program. The next time the program is started, the system will load these settings from the .INI file.
3.2. VIEW
3.2.1. View => Hold
Pauses the display of sonar data and all sonar communication. ( S
hortcut key ‘H’
)
3.2.2. View => Reverse
RealTime only
Changes the sweep direction. Toggles clockwise / counter-clockwise. ( S
hortcut key ‘spacebar’
)
3.2.3. View => Clear Screen
Clears the screen of historical data. ( S
hortcut key ‘C’
)