852-GS Ultra-Miniature Imaging Sonar
Doc No: 430-048-0B
Page
21
of
34
3. SOFTWARE MENUS
3.1.
FILE
3.1.1.
File => Connect to Sonar Head
Selects the data source to be from the sonar head and viewed in real-time.
3.1.2.
File => Open File to Playback
Data can be replayed from a previously recorded file from the “
Open File
” dialog box.
3.1.3.
File => Plot data from UDP
Specify a data source as an .81R data file that is received through a UDP port.
3.1.4.
File => Record Start (Stop)… / Copy Start (Stop)…
Record Start (Stop)
-
RealTime only
.
Copy Start (Stop)
- Playback only.
Toggles the record state on and off. Recording is done as per file the settings below. The file format for an
852-
GS is “.81R”.
3.1.5.
File => Set Record Directory…
RealTime only
Specify the directory in which you wish to save files. If nothing is specified, the program saves the copied /
recorded files to the directory from which the software was run. It is recommended to set this to a convenient
directory with sufficient permissions, such as a sub folder under “My Documents”.
3.1.6.
File => Auto Save File Names
RealTime only
Select the file name set automatically as Win881AL DD-MMM-YYYY HHMMSS.81R.
Automatically sets the filename in the format of “
Win881AL DD-MMM-YYYY HHMMSS.81R
”.
