Slimline Wall Mounted Tablet Enclosure
Range Instructions
A
Mounting the Enclosure and Power Cabling
[
Note:
Blue Cable
showing cable routing for cavity wall installations
]
Position Rear Enclosure (
A
) on surface in desired position.
Ensure the unit is level using a spirit level (
G
).
[
Tip: loosely screw in through top centre screw hole, as highlighted, to hold unit in
position
]
Screw in remaining screws (
F
) using
E
.
[
Note: We recommend using at least 4 of the 7 screw holes as shown
]
Depending on your chosen surface
it may be easier to;
- Mark the centre of the holes with a pencil (
H
).
- Drill pilot holes and install raw plugs if required.
A3 - Enclosure Mounting and Cavity Wall Power Cabling
A2 - Insert Power Cable
A1 - Removing the Tablet Cassette
Unlock both locks on either side of
A
using
the keys provided (
D
)
Push up
C
to release from
A
.
[Tip: Keep one hand on the enclosure
and one on Cassette]
With
C
released lift clear of
A
.
If using a cavity wall for power supply, skip to
Step 4
.
Insert your Tablet’s Power Cable through the small cut out in the
back of
A
and channel into the small cable cut out.
