Error! Use the Home tab to apply Überschrift 1 to the text that you want to
appear here.
Image Engineering
Error! Use the Home tab to apply Titel to the text that you want to appear here.
Seite
11
von
11
5.2 Care instructions
•
Do not touch, scratch, or pollute the diffusor.
•
If there is any dust on the diffusor, clean it with an air blower.
•
Do not remove the fiber from the spectrometer. Otherwise, the calibration is invalid, and
the spectrometer has to be
recalibrated
!
•
Only store and transport the CAL3-XL in the delivered hard case.
5.3 Disposal instructions
After the service life of CAL3-XL, it must be disposed of properly. Electrical and
electromechanical components are included in CAL3-XL. Observe your national regulations.
Make sure that CAL3-XL cannot be used by third parties after disposing of it.
Contact Image Engineering if assistance for disposal is required.
6 TECHNICAL DATA SHEET
See annex for the technical data sheet. It can also be downloaded from the website of Image
Engineering:
