B.3.2
Adjust Time & Date
In the
Poweruser
main menu screen (Picture 34) locate the section
Base Settings
. Click
on the button Adjust Time & Date .
Picture 36: Adjust Time and Date Screen
Select the time format.
Enter in section
NTP Server
all parameters for the communication with a NTP server.
Select the time zone and the daylight saving function.
Manually set the time and the date.
Click the button Manually to refresh all above modified data.
Click the button via NTP to connect to the above defined NTP server.
Note:
By default, the name of a scanned image contains the scan time and date,
therefore synchronizing the internal clock can be of some value.
Page 38
Setup and Assembly Manual
