Touch the control field
IP Address
. The touch panel changes to a mask where
IP Address, Gateway, and Netmask can be entered. Also the DHCP mode can be
selected.
Picture 26: Network setup
Touch on the line to be changed, e.g. the
Address
line. The touch panel shows:
Picture 27: Numeric key pad
Enter the new values. The
<
and
>
keys move the cursor, the
X
key deletes the number at
the cursor position.
To finalize the input tap on the checkmark key.
If entries have been changed, a screen opens where the changes must be confirmed.
Yes
confirms the changes,
No
discards the changes.
Picture 28: Confirm changes
After the changes have been saved, the touch panel shows the
Self test 1
menu again.
Setup and Assembly Manual
Page 31
