A.1.2
Floor Stand Overview
The engineering drawing below shows all major elements of the floor stand.
Picture 4: Technical drawing of floor stand
The floor stand is built out of five different components and one round rod.
No Qty Description
1
2
Horizontal traverse. This part is used on the top as well as on the bottom.
2
2
Vertical leg. This part is used on the left as well as on the right side.
3
2
Foot bracket. This preassembled part is used on the left and right side.
4
4
Adjustable feet. These are preassembled to the foot bracket.
5
2
Top bracket: This part is used on the left and right top side.
6
1
Horizontal rod. This part supports the paper exit basket.
Page 16
Setup and Assembly Manual
