Image Access Wide Tek WT 36C, Руководство по установке

Страница: 17 / 121

Setup Manual Page 17
A.7 Device Location
Note: Picture 1 shows a sketch with a
WideTEK
®
36C
. The minimum distances
around the scanner are also valid for the
WideTEK ® 48C
.
Please allow a minimum of
— 150 mm (6 inch) from any side walls
— 300 mm (12 inch) from a back wall.
— one meter (3 feet) minimum distance from any door or entrance way.
Use the illustration below as a guide.
Picture 1: Minimum distances
Do not operate the scanner in an area that has poor air circulation and/or that is not
ventilated.
Place the scanner on a flat and solid base. The load bearing capacity of the base must
correspond to the device weight.
Choose a location that complies with the temperature and humidity limits. For more
information refer to the chapter F.3.
Important: Before using the scanner in the new environment, allow at least one hour for
temperature adaptation.
Temperature adaptation means:
A fast change from cold to warm environmental conditions can build up
condensation inside the housing. This will result in unfavorable scanned
images and could cause permanent damage to the unit.