Image Access Bookeye Color, Руководство по эксплуатации

Страница: 68 / 72

14.2.3 Y-Adjust
This function adjusts the vertical start position accordingly to the documents bed edge.
1. Press the "Y-Adjust" button.
2. Remove all documents from the scanner's glass plate.
3. Press the "Next Step" button.
4. After the “Y-Adjust” function is finished the results will be displayed.
5. Click in section “Controls” the button “New Values” to repeat the measurement.
Or
6. Click in section “Menu Controls” the button “Back to Adj. Menu” to return to the
adjustments menu (see Picture 55).
14.2.4 Adjust White Balance
This function allows the user to adjust the S2N Scan2Net scanner's white balance
according to the scanned paper quality. Different paper qualities used for the white
balance adjustment will cause different scan results. With this function the user can easily
adjust the scanner to a white balance which matches its specific needs best.
1. Find the section “White Balance Adjustment” (see Picture 55) and click the button
“White Balance”.
2. Place at least two sheets of white paper on top of each other, e.g. paper for copiers or
laser printers, on the scanner as shown. This is necessary to make it more opaque.
The back of the CSTT-1 test target – coming with the scanner – can also be used.
3. Press the "Next Step" button.
4. After the “White Balance” function is finished the results will be displayed.
5. Click in section “Menu Controls” the button “Back to Adjustment Menu” to return to the
adjustments menu (see Picture 55).
Or
6. Click in section “Menu Controls” the button “Back to Main Menu” to return to the
“Poweruser” menu (see Picture 54).
Optionally, you may execute the white balance every time the paper quality of the
scanned documents changes.
Page 68 Operation Manual