11
REALISTIC GAS MANUAL APRIL 14414 DB
I l l u s i o n - A u s t r a l i a n M a d e G a s L o g F i r e s
1.
Fit the No. 1 Log rear left log onto the 2 pins on the left hand rear of the fi rebox on the top tier
of
the
false
fl oor as shown in fi gure 2 below. (B)
2.
Then
fi t the No. 2 log to the pins on the right (C)
3.
Fit the centre left log (No.3) then centre right log (No.4) onto the pins in the centre tier (D & E)
4.
Fit the left hand side front log (No.5) onto the pins in the front of the grate (F)
5.
Fit the centre front log (No.6) onto the pins in the front of the grate as shown.(G)
(The centre side front log overlaps the left hand side front log.)
6.
Fit the right hand side front log (No.7)onto the pins in the front of the grate as shown.(H)
FITTING THE LOGS
WHEN INSTALLING LOGS, ENSURE THAT BURNER HOLES ARE NOT BLOCKED.
Obsructing
any of the burner holes may result in poor performance and can cause sooting to occur.
CAUTION: LOGS ARE FRAGILE. PLEASE TAKE CARE WHEN INSTALLING
Log numbers are marked on the base of each log.
FITTING THE LOG SET - MODELS 5000-P, 5000L
WARNING: DO NOT USE LOGS OTHER THAN THOSE SUPPLIED BY THE
MANUFACTURER OR A HAZARDOUS SITUATION MAY RESULT.
A
B
C
D
E
F
THE COMPLETED LOG SET
G
H
CHECK THE LOCATION OF ALL
THE LOGS TO ENURE THEY ARE
SEATED FIRMLY BEFORE USING
THE APPLIANCE. INCORRECT
LOCATION OF THE LOGS MAY
CAUSE SOOTING AND POOR
PERFORMANCE.