INSTALLATION INSTRUCTIONS
VERSA™ VL MACHINED ACCENT
© 2016 Illumitex Inc. All rights reserved. The information in this document is subject to change without prior notice.
6301 E. Stassney Lane | Building 6, Suite 400 | Austin, TX 78744 | (512) 279-5020 | www.illumitex.com
54-113192-00D
NOTE:
This fixture is intended for installation in accordance with the National Electric Code and local code
specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage
to fixture, voiding the warranty. These instructions do not purport to cover all details or variations in
equipment, nor to provide for every possible contingency related to installation, operation, maintenance, or
mounting. Should specific problems occur that are not addressed by these instructions, contact your local
sales representative or distributor for assistance. Retain these instructions for future reference.
INSTRUCTIONS PERTAINING TO THE RISK OF FIRE OR INJURY TO PERSONS:
Lighted fixture may be hot. To reduce risk of injury to persons, turn off or disconnect fixture and allow to
cool before handling. Luminaire may be connected to a power supply of between 120VAC and 277VAC by
a licensed electrician. Failure to do so may result in serious injury or death. Fixture weight is approximately
4 pounds.
AVAILABLE SNOOT ACCESSORIES:
VL-SNT1
VL-SNT2
VL-SNT45