Unpacking
1. Inspect carefully for any signs of
damage that may have occurred
during transit.
2. Shipping damage claim must be
filed with carrier.
General Safety Information
1. Ensure that the power source
conforms to the electrical
requirements of the air circulator.
Prior to cleaning
make certain that
unit is unplugged and disconnected
from power source.
2. Where possible, avoid the use of
extension cords. If they must be used,
minimize the risk of overheating by
ensuring that they are UL Listed and
of the proper gauge and length.
Never use a single extension cord to
operate more than one air circulator.
3. Do not kink the cord or allow it to
contact oil, grease, chemicals, hot
surfaces, or sharp or abrasive objects.
4. This air circulator is to be operated
ONLY with its OSHA complying
guard in place to prevent persons
and objects from contacting the
revolving propeller. Any other use
voids warranty and may create
unsafe conditions.
Do not insert fingers
or foreign objects
into the air circulator. Do not block or
tamper with the air circulator in any
manner while it is in operation.
Do not touch motor.
May be hot enough
to cause injury.
To reduce risk
of fire or electric
shock, do not use this fan with any
Solid State Control devices.
5. Air circulator is intended for general
air circulation ONLY. It must NOT
be used in potentially dangerous
locations such as flammable,
explosive, chemical-laden
atmospheres. Do not attach ductwork
to the air circulator.
6. Air circulator motor is thermally
protected. Always unplug air
circulator before removing guard or
otherwise accessing the motor, as it
may restart unexpectedly.
7. In cases in which property damage
may result from malfunction of the
air circulator, a suitable alarm (air
switch, temperature sensor, etc.)
should be used
8. Do not operate any fan with a
damaged cord or plug. Discard fan or
return to an authorized service
facility for examination and/or repair.
9. Do not run cord under carpeting. Do
not cover cord with throw rugs,
runners, or similar coverings. Do not
route cord under furniture or
appliances. Arrange cord away from
traffic area and where it will not be
tripped over.
Rechargeable Fan
Instructions
IMPORTANT:
Do not use before
connecting the battery terminal.
See Figure 2.
1. Unpack the Rechargeable Fan and
open the battery door located on the
bottom of the Fan.
2. Connect the battery connector to the
Rechargeable Fan. Close the battery
Rechargeable Fan
Operating Instructions & Parts Manual
ILG937
Please read and save these instructions.
Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference.
Description
iLVING Rechargeable Fan is portable fan that move volumes of air at the desired
location with AC power source or battery operation after charged. Rechargeable
Fan has built in NiMH battery and adapter for AC operation and battery charging.
All units feature plastic propeller with glossy finish to offer quiet air flow.
Rechargeble Fan and adapter are UL and cUL listed.
Figure 1
®
Figure 2
®
