10
Audio Inputs
Optical Input
You will need: An audio source with an Optical Audio Output and a Digital Optical Audio Cable (included).
1. Connect the
Digital Optical Audio Cable
to the optical output on the audio source and to the
Optical Input
on the speaker bar.
2. Press the
Power
button to power the unit on.
3. Press the
Source
button repeatedly to switch to
SPDIF Mode
, indicated by a amber light.
4. Using the native controls on your connected device, make sure the audio settings are set to
PCM or Optical
Audio
and are turned On.
5. Audio from the connected audio source will now be played through the speakers.
Important tips for optical audio:
Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets.
Optical output is activated on the source (they should see a red light emitting from the toslink socket).
It may be labeled SPDIF in the setting menu of the source.
The optical output is set to output PCM and not Dolby Digital.
Stereo RCA Inputs (Aux In)
When connecting two products using an RCA cable (not included), match the colored ports to their corresponding plugs.
1. Connect the RCA cables (not included) to the RCA Stereo Inputs located on the back of the unit, and to the audio
outputs on a television or other audio source.
2. Press the
Power
button to power on the unit.
3. Press the
Source
button to select
Aux In
, indicated by a white light.
4. Audio played through the television will now be heard through the speakers.
Line In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input
cable into the
Line In
on the unit and plug the other end of the cable into
the audio output/headphone output on an MP3 Player or other audio source.
2. Press the
Power
button to power the unit on.
3. Press the
Source
button to select
Line In
, indicated by a green light.
4. Audio played through the connected device will now be heard through the speakers. Use the controls on the
connected device to play, pause, or skip selected tracks.
