2
GB
| Operating Instructions
1. Intended / not intended use
The chain saw serves trunks, square timbers and for cutting branches, according to the available cutting length.
Only materials from wood may be worked on.
Sufficient personal protection equipment (PPE) is required according to the operating instructions during the use. This
product is designed for use by a trained operator for pruning and dismantling standing tree crowns. For damage or
injuries which resulting from misapplication are responsible by the user/operator and not the manufacturer. Suitable
sawing chains, guide bars combinations may be used as mentioned in the operating instructions only for the machine.
A component of the intended use is also the attention of the safety references, as well as the operating instructions
in the operating instructions. Persons, who serve the machine, must make themselves trained and familiar with this
product and think over all the possible dangers. Beyond that the valid rules for the prevention of accidents are to be
kept in every detail. Other general rules within ranges according to industrial medicine and in terms of safety are to be
considered. Changes in the machine completely exclude an support of the manufacturer and from it developing dam-
age and lead to expiring the warranty. This equipment is designed for use in home garden.
Residual risks:
Also when appropriate using the tool; it always remains a certain residual risk which cannot be excluded. From the kind
and construction of the tool the following potential endangerments can be derived:
-
Contact with the unprotected sawing chain (cuts)
-
Unexpected, sudden movement of the sawing sword (cuts)
- Damage of the ears, if no prescribed protection of the ears is carried
- Inhale from poisonous particle, exhaust gases of the combustion engine
- Contact of gasoline on the skin
- Noise. A degree of noise from the machine is not avoidable. Route noisy work is to be licensed and limits for certain
periods. Keep rest periods and they may need to restrict the working hours to a minimum. For their personal protec-
tion and protection of people working nearby, an appropriate hearing protection shall be worn;
- Vibration. Warning: The actual existing vibration emission value during use of the machine can deviate from the
manual or the manufacturer specified. This can be caused by the following factors, before or during each of use
should be considered:
• If the machine is used correctly
• If the method of cutting the material and how it is processed correctly.
• The use of the machine state is in the regulatory
• Sharpness condition of cutting tool or cutting tool real
•
The grab handles are mounted back to optional vibration handles and are they fixed to the machine body. If you
notice an unpleasant sensation or skin discoloration during use of the machine on your hands once you stop work-
ing. Place an adequate work breaks. In disregard of adequate work breaks, there may be a hand-arm vibration
syndrome.
- Never attempt to use an incomplete machine or one which an unauthorised alteration has been implemented.
-
These devices are not designed to be operated by persons who have insufficient experience and/or insufficient
knowledge or by persons with impaired physical, sensory or mental capabilities, unless they are being supervised
by a person who is responsible for their safety or they are receiving instructions about how these devices are to be
used.
- Never allow children or persons unfamiliar with these instructions to use the machine. Local regulations can restrict
the age of the user.
-
Warning!
This machine generates an electromagnetic field when operated. This field can affect active or passive
medical implants in certain circumstances. In order to reduce the risk of severe injury or death, we recommend that
people with medical implants consult their doctor or the manufacturer of the medical implant before operating the
machine.
