P a g e
|
9
IKI Wood burning stoves | Instructions for installation and use
IKI Wood burning stoves | Finnish high-quality craftsmanship
2.3 Plus version installation instructions
As the stove consists of a separate furnace and fire tube and two separate frames, the installation is done
in phases as follows:
1.
Assemble the lower part of the stove as in Mini-IKI and Original-IKI, instructions without setting the
stones yet to the top part.
2.
Adjust the connection chimney pipe and the upper mesh in the connection point of the chimney
(picture 1. and 2.).
3.
Pile the stones to the lower part of the stove. The mesh should lie against the circular firetube. The
piling of stones in the space between the upper mesh frame and the chimney pipe should be is
done one stone at a time. When loading the stones try to cover the chimney pipe as well as
possible. The mesh frame settles in its place when approximately 4 inches (10 cm) of stones have
been loaded from the surface of the furnace. It is recommended that two people do the loading of
the stones of the upper mesh (pictures 3. and 4.).
