Canon EOS 5D Mark III, 5DS, 5DS R Update Kit
Product Number 9295.02
Installation - see Diagram on back page.
1.
Remove control knobs shown in Diagram using 1/8” Hex
Key (included with housing).
2.
Place one washer over each control shaft and replace
knobs.
3.
Retighten each knob set screw on corresponding control
flat.
4.
Check control functions.
Included in Kit
Nylon Washer: Qty. 4
This kit will allow the Canon 5D Mark IV camera to be used in a
Canon 5D Mark III, 5DS, 5DS R Ikelite housing.
Canon EOS 5D Mark III, 5DS, 5DS R Update Kit
Product Number 9295.02
Installation - see Diagram on back page.
1.
Remove control knobs shown in Diagram using 1/8” Hex
Key (included with housing).
2.
Place one washer over each control shaft and replace
knobs.
3.
Retighten each knob set screw on corresponding control
flat.
4.
Check control functions.
Included in Kit
Nylon Washer: Qty. 4
This kit will allow the Canon 5D Mark IV camera to be used in a
Canon 5D Mark III, 5DS, 5DS R Ikelite housing.
Canon EOS 5D Mark III, 5DS, 5DS R Update Kit
Product Number 9295.02
Installation - see Diagram on back page.
1.
Remove control knobs shown in Diagram using 1/8” Hex
Key (included with housing).
2.
Place one washer over each control shaft and replace
knobs.
3.
Retighten each knob set screw on corresponding control
flat.
4.
Check control functions.
Included in Kit
Nylon Washer: Qty. 4
This kit will allow the Canon 5D Mark IV camera to be used in a
Canon 5D Mark III, 5DS, 5DS R Ikelite housing.
Canon EOS 5D Mark III, 5DS, 5DS R Update Kit
Product Number 9295.02
Installation - see Diagram on back page.
1.
Remove control knobs shown in Diagram using 1/8” Hex
Key (included with housing).
2.
Place one washer over each control shaft and replace
knobs.
3.
Retighten each knob set screw on corresponding control
flat.
4.
Check control functions.
Included in Kit
Nylon Washer: Qty. 4
This kit will allow the Canon 5D Mark IV camera to be used in a
Canon 5D Mark III, 5DS, 5DS R Ikelite housing.