1. Insert Allen Head Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Steady Tray Mounting Hole as
shown. Guide Pin should line up with Guide Pin Hole.
3. Slide Nylon Washer and Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise and tighten with an
Open/Box End or Adjustable Wrench. Use Allen Wrench to keep
Allen Head Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount
for
Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
End Wrench
(not included)
Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Guide
Pin
Guide
Pin
Hole
Steady Tray
Mounting Hole
Steady Tray
(not included)
1. Insert Allen Head Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Steady Tray Mounting Hole as
shown. Guide Pin should line up with Guide Pin Hole.
3. Slide Nylon Washer and Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise and tighten with an
Open/Box End or Adjustable Wrench. Use Allen Wrench to keep
Allen Head Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount
for
Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
End Wrench
(not included)
Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Guide
Pin
Guide
Pin
Hole
Steady Tray
Mounting Hole
Steady Tray
(not included)
1. Insert Allen Head Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Steady Tray Mounting Hole as
shown. Guide Pin should line up with Guide Pin Hole.
3. Slide Nylon Washer and Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise and tighten with an
Open/Box End or Adjustable Wrench. Use Allen Wrench to keep
Allen Head Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount
for
Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
End Wrench
(not included)
Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Guide
Pin
Guide
Pin
Hole
Steady Tray
Mounting Hole
Steady Tray
(not included)
1. Insert Allen Head Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Steady Tray Mounting Hole as
shown. Guide Pin should line up with Guide Pin Hole.
3. Slide Nylon Washer and Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise and tighten with an
Open/Box End or Adjustable Wrench. Use Allen Wrench to keep
Allen Head Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount
for
Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
End Wrench
(not included)
Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Guide
Pin
Guide
Pin
Hole
Steady Tray
Mounting Hole
Steady Tray
(not included)
