Ikegami FA-97A, Руководство по эксплуатации

Страница: 94 / 166

78
HDK-99 1803 VER1 (E)
5.1 Settings Using Switches on the Camera
Enhancing the Vertical Resolution (Super-V Function)
Super-V function enhances the vertical resolution. It is activated from the camera, MCP, or OCP.
Note:
- The sensitivity of the camera decreases when in the Super-V function mode.
- When a remote controller is connected, the operation of the remote controller has priority over the operation switches on the camera.
Camera right view
(Switch control panel)
Camera front view
SHUTT/SUP-V switch Rotary pulse switch
1
Select "1" or "2" from MENU (1/4) "VF DISPLAY" - "DISPLAY MODE."
Characters appear in the viewfinder.
Reference:
Refer to "5.2 Settings from the Menu : Menu Configuration and content" (P85) for details.
2
Set the SHUTT/SUP-V switch on the right side of the camera to SET.
One of the following modes is displayed:
- Preset shutter speed
- Variable shutter speed
- SUPER-V
Note:
Each time the SHUTT/SUP-V switch is pressed to the SET position, the mode switches are in the order of preset shutter,
variable shutter and SUPER-V.
3
Select "SUPER-V."
Note:
The flashing stops automatically in approximately 3 seconds after the setting operation ends.
4
Press the SET button.
■
To Cancel the Super-V Function
1
Set the SHUTT/SUP-V switch to OFF.