IKEA FOLKLIG, Инструкция по эксплуатации

Страница: 8 / 20

ENGLISH 8
appliance being connected to the power
supply in the home.
To activate the demo mode, hold the two
external cooking zone selection buttons at
the same time for at least 5 seconds: “dE”
appears on the central display. You can now
explore the control panel functions.
To deactivate Demo mode, repeat the
procedure, remembering first of all to
disconnect the hob from the mains and then
reconnect it, carrying out the procedure
within 60 seconds of connection.
Activation/deactivation of the acoustic
signal
After switching on the hob, keep the “+”
button and outermost selection button on
the right (“control panel lock”) pressed at
the same time for at least 3 seconds
Deactivation of cooking zones
Select the cooking zone you wish to switch
off. Press the corresponding button (a dot
lights up at the bottom right of the power
level indicator).
Press the key “-” to set the level to “0”.
To switch off instantly, hold the zone
selection button for 3 seconds. The cooking
zone switches off and the residual heat
indicator “H” lights up.
Control panel lock
This function locks the controls to prevent
accidental switching on of the hob.
To activate the control panel lock function,
hold button C for 3 seconds.
The control panel is locked except for the
deactivation function. To deactivate the
control panel lock, repeat the activation
procedure.
The luminous dot goes off and the hob is
active again.
The presence of water, liquid spilled from
pots or any objects resting on the button
below the symbol can accidentally activate
or deactivate the control panel lock function.
Slider
The timer can be used to set cooking time
for a maximum of 99 minutes (1 hour and 39
minutes) for all cooking zones.
Select the cooking zone to be used with the
timer (an illuminated dot appears to the
bottom right hand side of the heat setting
indicator on the display), press the button
with the clock symbol then set the desired
cooking time using the buttons “+” and “-”
of the timer function (see figure).
After a few seconds, the timer begins the
countdown (an illuminated dot is visible next
to the zone for which the timer has been
activated).
Once the set time has elapsed, an acoustic
signal sounds and the cooking zone switches
off automatically.
To deactivate the timer, press the “-” button
until the display shows “0:0”.
To set the timer for another zone, repeat
the points above. The timer display always
shows the timer for the selected zone or the
shortest timer.
To change or switch off the timer, press
the zone selection button for the timer in
question.
Control panel warnings
Residual heat indicator.
The hob is fitted with a residual heat
indicator for each cooking zone. These
indicators alert the user when cooking zones
are still hot.
If the display shows H, the cooking zone is
still hot. If the residual heat indicator of a
given cooking zone is lit, that zone can be
used, for example, to keep a dish warm or
to melt butter.
When the cooking zone cools down, the
display goes off.