3
for purchasing this IKARUS product. It has been carefully packed and checked at our facility. Nevertheless, please
check immediately that this product is complete and undamaged. You will understand that we cannot accept any
claims arising at a later date.
is a very sensible subject for this high performance helicopter. Assembled and flown by skilled hands it offers fun
and satisfaction. Nevertheless, it is not a toy and should be operated with care and responsibility.We have to reject
any claims arising from inexperienced use or misuse.
Helicopters are subject to various physical laws which can result in a successful flight or a disappointing crash. Our
job has been to develop a safe flying model. The model has been professionally developed and tested substan-
tially. The assembly is now your part. Please carefully read, understand and follow the building steps. Indicated
angles and other measurements have to be followed precisely. Therefore:
Build and maintain your helicopter
very carefully. If you have any doubts, take a break, think carefully or ask an experienced model helicopter
pilot.
It’s worth the effort.
Most of the parts are packed in building steps. First read the entire instructions manual and familiarize yourself
with the system. Open only one bag at a time as needed for the building step and put the parts in a small bin or
bowl. Assemble the helicopter step by step, bag by bag. This way qou will not loose or misplace any parts.
We guarantee that this product is free of manufacturing defects in material and workmanship according to the
current ”IKARUS Business Terms“. No claims will be accepted for failure due to a crash, incompetent handling, al-
terations, lack of maintenance, incorrect or commercial use or the use of other than original IKARUS replacement
or tuning parts. Direct or subsequent damage claims are not accepted.
The standard rotor head configuration as supplied in the kit should not exceed 1550 rpm. The model has been
designed for dynamic aerobatic maneuvers (loops, rolls, turns and combinations thereof). If you wish the fly 3D
aerobatics at higher rpms, the aluminum rotor head is required.
Item
Item No.
Description
The Motor
70503
H8 – Hi-Performance Brushless Motor and
67618
19 T Pinion
The Motor Controller
70504
Lexors H40 Brushless Controller
The R/C System
177220
6 channel Nova 6 plus transmitter 72 MHz (only in USA/ Canada) with
7011072
GigaTronic Helicopter Program Module 72 MHz (only in USA/ Canada)
or a computerized radios system with helicopter program with
173671
MR 6 Receiver 72 MHz (only in USA/ Canada)
The Crystals
...
you find the crystals on our website www.ikarus.net
171400
Lexors Mini Servo 400 BB (4 required)
The Gyro System
720717
Profi Micro Gyro with Heading Hold or
720654
Mini Gyro
The Flight Battery
2027029
Lithium-Polymer battery, 5000 mAh
The Charger
2027014
Multi-Charger for Li-Po and NiMh/Nicad batteries or
RO8393
Power Peak 3/24 Sport Li-Po Charger
The Connectors
8013003
Gold Connectors (1 pair)
The Lubricant
67959
Special Grease for Metal and Plastic
Main Rotor Diameter 1060 mm (41.7in)
Length 970 mm (38.2 in)
Weight from 1500 g (3.3 lbs)
• Razor blade knife (X-acto with blade # 11)
• Phillips screw driver small
• Allen Key Set (IKARUS # 8012001)
• A pair of pointed pliers
• Profi Tool Set (IKARUS # 67950)
• Bowls for small parts
• CA (Speed) Glue like ZAP
• Loctite Thread Locker
• Balancer and Gauge Set (IKARUS # 67951, contains the
• Ball-Link Pliers (IKARUS # 67958)
Pitch Gauge # 67680, Blade Balancer # 631080 and the
Tailrotor Balancer # 67957)
1. Thank you...
3. Warranty
2. Care...
5. You will
need
6. Dimensions
7. Requiered
Tools
Introduction
4. Load
Limitation
