INTRODUCTION
Thank you for purchasing the ikan PT1000W Teleprompter. The PT1000W Teleprompter is extremely easy to use and will
quickly become an integral part of your production kit. For more information on this and many other innovative ikan
products please visit our website: www.ikancorp.com
PACKAGE CHECK LIST
V8000Ws Monitor
A/V Cable
VGA Cable
Mounting Rod
Prompting Software
Remote Control
AC Adapter
Monitor Bracket
GETTING STARTED
1. Mount the Monitor
a. Attach the monitor bracket to the back of the monitor, sliding up the Receiving Nut (with the bracket) in the
T-channel mount.
b. Attach the mounting rod to the shoe mount of your camera.
c. Place the end of the mounting rod into the top mounting hole of the monitor bracket and tighten the knob on the
top of the bracket to hold it in place.
2. Connect the VGA
a. Plug the A/V cable to the bottom of the monitor.
b. Connect the VGA cable’s mini din connector to the mini din connector on the A/V cable.
c. Plug the 15 pin connector of the VGA cable to the secondary monitor port of your computer.
d. Start your computer and set it up for dual monitors.
e. Set your secondary monitor to 800X600 resolution.
3. Install Prompting Software
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations:
* Even if the product is still within the warranty period.
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.
Q
UICK
S
TART
G
UIDE /
PT1000W Teleprompter
3903 Stoney Brook Dr. Houston TX 77063. 1-713-272-8822, [email protected] © 2008 iKan Corporation. All right reserved. www.ikancorp.com
Receiving Nut
Step 1.a.
Step 1.b.
Step 1.c.
Shoe mount
your
camera
