IKA SMRA + MRA, Руководство пользователя

Страница: 17 / 40

SMRA - SSI and BiSS
4.6 Counting direction input
The
standard counting direction
is to be intended with ring turning as
indicated by the arrow in Figure 1. The counting direction circuit allows to
reverse the counting direction. In other words it allows the count up when the
ring turns in reverse of the standard direction, i.e. in the opposite direction to
the one shown by the arrow in Figure 1. Connect the Counting direction input
to 0Vdc if not used. Connect the counting direction input to 0Vdc to have an
increasing count when the ring turns as indicated by the arrow in Figure 1;
connect the counting direction input to +Vdc to have an increasing count when
the ring turns in reverse of the standard direction, i.e. in the opposite direction
to the one shown by the arrow in Figure 1.
WARNING
After having set the new counting direction it is necessary to set the sensor to
zero/preset.
MAN SMRA SSI_BiSS E 1.4.odt 4 – Electrical connections 17 of 40