ONLINE ELECTRONICS LTD
ID5002P MANUAL RevA01
Page 14 of 21
3.6.5.
SUNSHADE POST MOUNTING
If the main housing is exposed to direct sunshine
then it is recommended that a sunshade is installed
to prevent unnecessary heating of the unit which
may shorten the lifespan of the equipment.
Secure the post mount sunshade to the post as
shown using the supplied M8 U-bolt / post / clamp /
sunshade / 2x M8 washers / 2x M8 nuts.
3.6.6.
SUNSHADE PIPELINE MOUNTING
If the main housing is exposed to direct sunshine then it is recommended that a sunshade is
installed to prevent unnecessary heating of the unit which may shorten the lifespan of the
equipment.
The pipeline mounted sunshade is fixed to the same mounting plate as the main unit using 2x
‘C’ brackets as shown. This assembly is then mounted onto the pipeline as described in section
3.6.3 MAIN HOUSING PIPELINE MOUNTING.
Secure 2x pipeline mount sunshade brackets to the
mounting plate using 4x M8x20 hexbolts / 2x ‘C’ brackets /
mounting plate / 4x M8 nuts.
Secure the sunshade to the 2x brackets using 4x M8x20
hexbolts / 4x M8 washers / sunshade / 2x ‘C’ brackets / 4x
M8 nuts.
