IK Multimedia Uno Synth Pro Editor, Руководство пользователя

Страница: 15 / 23

UNO Synth Pro Editor
3 - The Synth Panel: ENGINE
15
3.4 – The Envelope Section
The UNO Synth PRO has two 4-stage envelopes that are pre-configured to modulate the Filters and Amplitude.
The Envelopes can also be set to modulate other destinations in the Modulation Matrix.
Controls:
• Filter Envelope: Set the Attack time, Decay time, Sustain level and Release time to create a shape that
modulates the Filters or any other destination available in the Modulation Matrix. You can use the Env Am
knobs in the Filter section to set how much the Filter Envelope will modulate each Filter.
• Amplitude Envelope: Set the Attack time, Decay time, Sustain level and Release time to create a shape
that modulates the amplitude of the synth or any other destination available in the Modulation Matrix.
• Loop buttons: Each envelope has a Loop button that will cause the envelope to loop continuously while a
key is depressed. This allows the envelopes to work like complex LFOs as you change the envelope shape.
• Retrig buttons: Each envelope can be set to retrigger every time a new note is played or wait to retrigger
until all notes are released and then a new note is played (legato envelope behavior).
3.5 – LFO Section
The UNO Synth PRO has 2 low frequency oscillators, “LFOs,” that can modulate multiple destinations in the
synth such as pitch, filter cutoff, resonance level or amplitude. Assign the destination for each LFO in the
Modulation Matrix.
Controls:
• LFO Shape 1 and 2 knobs: Set the shape for each LFO between sine, triangle, up saw, down saw, square,
random, sample-and-hold and noise.
• LFO Sync 1 and 2 buttons: Set whether each LFO will sync to the master tempo with its rate represented
as note values or using its own internal oscillator rate.
• LFO Retrig 1 and 2 buttons: Set whether each LFO will run continuously or reset with every new note
played.
• LFO Rate 1 and 2 knobs: Set the speed for each LFO. If LFO Sync is on, the value will be represented as
a musical note value.
• LFO Fade In 1 and 2 knobs: Set the amount of time from when a note is played that the amplitude of each
LFO will fade up to maximum.
• LFO Fade Curve buttons: Set the curve for the fade in of each LFO between Linear, Exponential and
Logarithmic