Quick programming using Avelour
Manuel d’utilisation
K0J00010
IJINUS NA
-
c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States -
20
h.
Seventh step : Pair devices
Our level sensor can retrieve locally the data from other sensors and logger nearby by radio, and send them with its
modem.
To do this you need to check in Avelour what devices can this sensors see around it. In the Pair devices part, click the
Edit button
Then you need to click the Refresh button to run the test. Simply tick the boxes corresponding to the devices you want
to associate.
Check the strength of the radio signal by placing the cursor on the bars indicator (Be careful the quality of radio signal is
nothing to compare with GSM/GPRS : -70 dBm is a bad quality for radio and excellent for GSM/GPRS)
i.
Eighth step : Data sending
As we said at the beginning of the document different ways to send data are possible like Sms and Gprs/3G/Ftp. In this
part I will show you the way to do it by Sigfox and GPRS. First keep in mind that on the installation location if you
already can’t find operator signal in surface, it will be even more difficult while under a metal cover in the manhole.
Sending by SIGFOX :
After clicking the Edit button, choose the sending period, define to send every day or only some of them. You can define
several periods. Depending on your configuration you may need to choose a minimum delay between 2 anticipated data
sending.
Finally you should run a test by clicking the Launch button to check if the data are sent to our website if your account is
created and the sensor already configured.
