Iiyama G-Master GB3467WQSU, Руководство пользователя

Страница: 10 / 32

ENGLISH
6 BEFORE YOU OPERATE THE MONITOR

Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
CAUTION
FITTING AND REMOVAL OF BASE
<Removal>
Put the front cushion on a flat surface and place the monitor with face down on it .
Loosen the ’thumb screw’ to remove the Stand-Base from the monitor.
<Installation>
As shown below, place all the contents taken out from the carton box on a flat surface with the
monitor front face down.
Take off the rear cushion and turn the Stand-Neck 90 degrees.
Install the Stand-Base as shown on the below picture.
Tighten the ’thumb screw’ to secure the Stand-Base to the monitor.
Stand the monitor and then remove the front cushion.
Stand-Neck
Stand-Base
Thumb screw for Stand-Base