ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/EEC
“Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All
places of operation are characterised by their connection to the public low voltage power supply system.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out
in the radio interference regulation of the Canadian department of communications.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
n
We reserve the right to change specifications without notice.
n
All trademarks used in this user manual are the property of their respective owners.
n
This manual is printed on recycled paper.
FCC DECLARATION OF CONFORMITY
Model Number:
AQ5311D / AQ5311D BK
Trade Name:
iiyama
Responsible party:
IIYAMA North America, Inc.
Address:
1560 Brookhollow Drive, Suite 208, Santa Ana, CA 92705 U.S.A.
Telephone number:
714-437-5111
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and peripherals,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the device is operated in a residential environment. This device generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If you determine the device does cause harmful interference to radio or television reception (this may
be determined by monitoring the interference while turning the device off and on), you are encouraged to try to
correct the interference by one of the following measures:
n
Reorient or relocate the receiving antenna.
n
Increase the separation between the device and receiver.
n
Connect the device into an outlet on a circuit different from that to which the receiver is
connected.
n
Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION
Changes or modifications not expressly approved by iiyama could void the users authority to
operate the device under FCC compliance regulations.
