II Morrow Apollo GX 50 Скачать руководство пользователя страница 21

Страница: 21 / 207

External Annunciators

When external indicators are installed, the Apollo GX

will also provide an external indication when Parallel

Track (PTK) is activated or a Message (MSG) is

received. The GX50/60 also have external

annunciator controls for OBS/Hold and Approach

Active.

Controls

The Apollo GX uses a variety of controls to manage

the features. The controls include a power knob,

dual-concentric knobs (called LARGE and SMALL),

hard keys, and “smart” keys.

Power Knob

The knob on the top right side of the Apollo GX

controls power on/off. Rotate the knob clockwise

(CW) past the detent to turn the power on. Rotate the

knob fully counterclockwise to turn the power off.

Full rotation and the push-pull capabilities are only

used in the GX60.

Power/Volume/Squelch Knob(GX60)

The knob on the right side of the GX60 controls power

on/off, volume, and squelch test. Rotate the knob

clockwise (CW) past the detent to turn the power on.

Continue rotating the knob to the right to increase

speaker and headphone amplifier volume level. Rotate

the knob to the left to reduce the volume level. Pull the

knob out to disable automatic squelch.

SMALL and LARGE Knobs

The dual concentric knobs on the right side of the

front panel are used to select pages, edit characters

and values, or other options. The LARGE knob

moves the cursor and the SMALL knob changes

characters. Either may change pages depending on

the function.

Keys

There are two types of keys that allow you access to

the functions in your Apollo GX: permanent “hard”

keys and displayed “smart” keys. Seven back lighted

permanent keys are used to reach the functions or

perform other operations of the Apollo GX. The

“smart” key labels are shown on the bottom of the

display. There are two categories of “smart” keys:

Introduction

Содержание Apollo GX 50
















































































































































































































Результаты поиска

Содержание Apollo GX 50

Отзывы:

Бренды по названию

Популярные бренды

II Morrow Apollo GX 50, Руководство пользователя

Результаты поиска

Содержание Apollo GX 50

Отзывы:

Бренды по названию

Популярные бренды