Enroute
Within 30 nm
of Destination
IAF Active
Waypoint
FAF Active
Waypoint
At FAF (MAP
Becomes
Active)
At MAP
(TO/FROM
Transition)
MAHP Active
Waypoint
Approach Checklist
Load Approach
Enable Approach & enter altimeter
setting
(Approach annunciator turns ON)
(CDI goes to 1 nm full-scale sensitivity)
Verify Approach annunciator is ON
Set OBS/HLD: ON for Procedure
Turn or Hold
OFF to sequence
Verify green Approach-Active
annunciator is ON
Verify altimeter setting is entered
Set OBS/HLD: OFF to sequence
to MAP
Verify Approach-Active annunciator
is ON
(CDI goes to 0.3 nm full-scale
sensitivity)
If NOT landing: Press OBS/HLD to
cancel Approach-Active
(Green Approach-
Active annunciator turns OFF)
(Approach Annunciator remains ON)
(CDI goes to 1.0 nm full-scale sensitivity)
Verify OBS/HLD is ON
Location
Action
Apollo NMC 2001/2101
