Draco MultiView 4K
60
Configuration via OSD
95
6.5.11 Resetting a Layout
With activated edit mode, a single layout or all layouts can be reset.
Possibility 1
1. Press Ctrl + r.
A dialog appears.
Fig. 73
OSD Menu
Free Mode - Edit Mode - Save Layout
2. To reset one specific layout:
2.1. Select a specific layout (Layout 1..4).
2.2. Click
Reset
.
The selected layout is reset to the factory settings and the video signal is displayed in the current
resolution.
3. To reset all layouts, click
Reset All
.
All layouts are reset to the factory settings and the video signals are displayed in the current resolution.
Possibility 2
Opening another layout discards a layout without saving changes. This can be used to reset changes of the
current layout (see chapter 6.5.9, page 93).
Possibility 3
Exiting the edit mode of the Free Mode and clicking
Discard Changes
discards all unsaved changes. This
can be used to reset changes of a layout (see chapter 6.5.12, page 96).
