Operation via OSD
Draco MultiView 4K
60
164
11.3 Powering Down, Restarting, and Resetting via OSD
11.3.1 Powering Down the Draco MV
To shut down the Draco MV, proceed as follows:
Select
Configuration > Shut down MV
in the main menu.
The current configuration is saved in the permanent memory of the Draco MV and the Draco MV will be
shut down.
NOTICE
After shutting down, the Draco MV can be disconnected from the power supply voltage.
Fig. 128 OSD Menu
Configuration - Shut down MV
11.3.2 Restarting the Draco MV
To perform a restart of the Draco MV, proceed as follows:
Select
Configuration > Restart MV
in the main menu.
The current configuration is saved in the permanent memory of the Draco MV and the Draco MV will be
restarted with the current configuration.
Fig. 129 OSD Menu
Configuration - Restart MV
