2.2 System Overview
Repeater Function
(
optional: Media Conversion
)
1. Source (computer, CPU)
2. KVM Extender CPU Unit
3. Interconnect cable (Cat X)
4. Draco vario (
Cross
) Repeater
5. Interconnect cable (Cat X /
fiber
)
6. KVM Extender CON Unit
7. Console (monitor, keyboard, mouse)
Dual Media Conversion
1. Source (computer, CPU)
2. KVM Extender CPU Unit
3. Interconnect cable (Cat X)
4. Draco vario Cross Repeater #1
5.
Interconnect cable (fiber)
6. Draco vario Cross Repeater #2
7. Interconnect cable (Cat X)
8. KVM Extender CON Unit
9. Console (monitor, keyboard, mouse)
First time users are recommended to setup the system
in the same room as a test setup. This will allow you to
identify and solve any cabling problems, and experiment
with your system more conveniently.
Please verify that interconnect cables, interfaces, and
handling of the devices comply with the requirements (see
manual Chapter 7, Page 57).
To power up the system, the following sequence is
recommended:
Monitor – CON Unit – Draco vario Repeater – CPU Unit –
source.
Series 485 Draco vario Repeater
Series 485 Draco vario Repeater
Series 485
Draco vario Repeater
INSTALLATION
INSTALLATION
1
2
4
5
8
3
7
9
6
1
2
4
5
3
7
6
1
2
4
5
3
7
6
1
2 3 4
5
1 2 3 4 5
1
2 3 4 5
2.3 Status LEDs
Status Draco vario Repeater Module
The Draco vario Repeater module is fitted with a multi color
LED for overall status indication and with two further LEDs for
indication of the connection status.
1. System Setup
Draco vario Repeater Setup
1.
Switch off all devices.
2. Connect the Draco vario Repeater with the interconnect cable(s).
3. Connect the chassis of the Draco vario Repeater to the power
supply.
4. Power up the system.
2. Specifications
2.1 Package Contents
Your extender package contains the following items:
■
Draco vario Repeater
■
1x (redundancy 2x) 5VDC international power supply unit per
KVM Extender unit (depending on chassis)
■
1x (redundancy 2x) country-specific power cord (depending on
chassis)
■
Quick Setup
If anything is missing, please contact your dealer.
Module
Module
Rear View
Rear View
LED 1/2 and 4/5: Connection Status
Pos. LED
Status
Description
1/4
Failure LED
(green)
Off
Connection available
On or
Flashing
Connection failure (flashing
for about 20 s following a
connection failure)
2/5
Status LED
(green)
Flashing No connection via interconnect
cable
on
Connection available
LED 3: Device Status
LED color
Description
Red
Device ready
Blue
Link 1 (left connector) available,
Link 2 (right connector) not detected
Green
Link 2 (right connector) available,
Link 1 (left connector) not detected
Light
Blue
Link 1 (left connector) and
Link 2 (right connector) available
INSTALLATION
