Ihse Draco U-Switch, Руководство пользователя

Страница: 29 / 53

Draco U-Switch Installation
29
6 Installation
NOTICE
Please verify that interconnect cables, interfaces, and handling of the devices comply with the
requirements (see chapter 9, page 43).
First-time users are recommended to set up the system in a test environment that is limited to a single
room. This makes it easier to identify and solve any cabling problems, and experiment with your system
more conveniently.
6.1 Setting up the System
6.1.1 Setting up the U-Switch
1. Switch off all devices.
2. Connect the USB cables to the CPUs (or CON Units when using a KVM matrix system) and to the U-
Switch.
3. Connect mouse and keyboard to the U-Switch.
4. Connect the 5 V DC power supply unit to the U-Switch.
5. Power up the system.
When powering the U-Switch, a boot process will be enabled (duration approx. 30 s).
Only after completion of the boot process, the U-Switch can be used, and keyboard and mouse will be
enabled.
6.1.2 Setting up the GPIO Module
The GPIO module can be hot plugged.
6.2 Connecting to the U-Switch via Management Software
The management software can be used to configure the U-Switch and to update the firmware of the
U-Switch.
The management software is available as a single executable program file (desktop) that does not require
installation.

Save the management software in a locally available directory.
Requirements
If you want to use the management software on Windows operating systems with integrated Java Runtime,
the following requirements must be fulfilled:
Computer / Software / Network Requirements / Recommendations
Free memory RAM Recommended: 512 MB
Operating system Microsoft Windows 8, Windows 8.1, Windows 10
Management software
with integrated Java
Runtime
Tera Tool Downloaded from https://www.ihse.com/software
Network connection - Available between computer and matrix