Table of Contents
Draco U-Switch
12
4
Description
4.1 Intended Use
The U-Switch product line is designed to seamlessly control multiple sources (computer, CPU) as one
using just a single set of keyboard and mouse while the sources (computer, CPU) video outputs are
connected straight to the monitors.
Keyboard and mouse control then is being switched amongst the attached sources (computer, CPU) by
simply moving the mouse over the boarders of the displays according to their predefined arrangement.
The U-Switch is designed to be operated as a stand-alone device as well as in combination with the
complete Draco KVM extender and switch family.
To use an external switching solution via push button or dry-contact, the U-Switch can be used with the
optional GPIO module R474-BGX which offers an interface to switch the USB-HID signal and to indicate
the switching status (see chapter 9.1.4, page 43).
NOTICE
Interferences when the immunity limit values are exceeded
If the limit values listed in EN55024 are exceeded by the customers environment, reliable and fault-free
functioning of the devices cannot be guaranteed.
NOTICE
Possible radio interference in a domestic environment
This is a Class A product. In a domestic environment, this product may cause radio interference in which
case the user may be required to take adequate measures.
Follow the safety and installation instructions given in this manual.
Use connection cables according to the specifications for the length and type given in this manual.
