Ihse Draco tera enterprise 480 Series, Руководство пользователя

Страница: 42 / 401

Description Draco tera enterprise
42
3.7.5 Parallel Operation (Stacking)
If you have special configurations, especially at installations with several monitors per workstation or
additional support of USB 2.0 transmission paths, the number of connectable sources and sinks can be
increased by a parallel operation (stacking) of several Draco tera devices.
One Draco tera matrix is defined as the
Master Matrix and its IP address entered into the Master IP
Address field (see chapter 6.3.1, page 72). All other matrices are defined as Sub Matrices. Sub matrices
must be connected to the master matrix via network connector (RJ45) on the controller board. The Enable
LAN Echo
option has to be activated at the master matrix (see chapter 6.3.1, page 72).
If a switching command is performed using the OSD, the synchronized matrices will also switch
automatically.
Switching of stacked devices might be delayed by several seconds.
Fig. 35 Example - Parallel Operation (Stacking)
1 Dual-Head sources
2 Single-/Dual-Head CPU Units
3 Interconnect cable
4 Master matrix
5 Synchronized matrix 6 Network connection master matrix /
synchronized matrix
7 Dual-Head CON Units
8 Console (2x monitor, 1x keyboard, 1x mouse)
1 2 3
5
3 7 8 4 6