Draco tera
214
2017-09-06
6.7
Multi-Screen Control
The Multi-Screen function contains a switching of the USB-HID signal
between different statically connected sources (computer, CPU) within a
CON Device and can be performed in two different ways:
Switching via Mouse
The switching of the USB-HID signal can be made by a movement of the
mouse pointer beyond the edge of the current display to a neighboring
display (see Chapter 5.13.7, Page 154).
In order to perform a switching operation by movement of the mouse
pointer, proceed as follows:
1. Move the mouse pointer to that edge of the display which borders
vertically or horizontally to the neighboring display.
2. Move the mouse pointer beyond the edge of the display. The mouse
pointer will appear on the adjacent display.
The switching operation has been performed and the USB-HID signal
will be now available at the target display.
Switching via Keyboard
Switching of the USB-HID signal can also be achieved using the keyboard
(configuration see Chapter 5.13.7, Page 154).
In order to perform a switching operation via keyboard command, proceed
as follows:
1. Start Command Mode with the 'Hot Key' (see Chapter 5.1, Page 55).
2. Select the target display by pressing the respective key on the
numeric pad of the keyboard.
The switching operation will be performed and the USB-HID signal
will be available at the target display.
