Draco vario
DisplayPort
1.1
Important Information
9
1.5 Certificates/Directives
1.5.1 North American Regulatory Compliance
The "equipment" referred to in the "North American Regulatory" chapter consists of a fully assembled modular
system and includes the chassis, extender modules and possibly add-on modules along with supplied cables. For
more details about the modular system, please refer to chapter 4.1.1, page 12.
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission
regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
All power supplies are certified to the relevant major international safety standards.
1.5.2 EU Declaration of Conformity
Please find the EU Declaration of Conformity for the device under:
www.ihse.com/eu-declaration-of-conformity
A copy of the original, product-specific EU Declaration of Conformity can be provided upon request. For contact
details, see page 2 of this manual.
1.5.3 WEEE
The manufacturer complies with the EU Directive 2012/19/EU on the prevention of waste electrical and electronic
equipment (WEEE).
The device labels carry a respective marking.
