Ihse 483 Series Скачать руководство пользователя | Manualshive

Страница: 35 / 85

background image

Draco vario

DisplayPort

1.1

Access Options

35

5

Access Options

You have following options to configure and/or operate extender modules:

Access option

Description

Command mode

The CON extender modules include a command mode that enables access to several

functions of connected KVM devices, e.g., Draco U-Switch or Draco tera matrix switch

when using additional keyboard commands.
In addition, individual extender module functions for USB HID Ghosting and the EDID, as

well as switching via command mode and additional keyboard commands can be

executed.

Management software Firmware updates for extender modules can be performed via the management software.

The management software is available in the form of a single executable program file.

The management software can be downloaded from the link

https://www.ihse.com/software

For extender modules connected to a matrix, additional functions are available in the

management software. For more information, please refer to the manual of the respective

IHSE Draco tera matrix.

Mini-USB interface

Extender modules can be parametrized or updated via Mini-USB interface.

5.1 Command Mode

To start the command mode, use a keyboard sequence (Hot Key) at the keyboard of a CON Unit plugged in a
KVM device. The command mode can also be called up using a keyboard with USB HID interface connected to the
R474-BXH add-on module.
To exit the command mode, press Esc.

NOTICE

While in command mode,



the Caps Lock and Scroll Lock LEDs on the keyboard are flashing,



the USB HID devices are not operable, mouse and keyboard functions are deactivated,



only selected keyboard commands are available.

If there is no keyboard command entered within 10 seconds after activating the command mode, it will be

deactivated automatically.

The following keyboard commands are used to enter, and to exit the command mode, and to change the Hot Key.

Function

Keyboard command

Start the command

mode

2x Left Shift (Hot Key, factory setting)

Exit the command

mode

Esc and also Left Shift + Esc, if necessary

Change the Hot Key

current Hot Key, c, new Hot Key Code, Enter

«
...
33
34
35
36
37
...
»

Содержание 483 Series






















































































Отзывы:

Нет отзывов

Похожие инструкции для 483 Series

Бренд: KanexPro Страницы: 16

Бренд: APURO Страницы: 8

Бренд: zioncom Страницы: 6

Бренд: Interlogix Страницы: 32

Бренд: Hendi Страницы: 72

Бренд: smart-e Страницы: 5

Бренд: Oster Страницы: 2

ToolBox GTB-HD4K2K-642-BLK

Бренд: Gefen Страницы: 122

Бренд: Digitus Страницы: 10

Бренд: AV Access Страницы: 16

Бренд: LINK-MI Страницы: 4

Бренд: EZCast Pro Страницы: 9

Бренд: Zelmer Страницы: 64

Бренд: Frigidaire Страницы: 24

Бренд: Electrolux Страницы: 136

Бренд: Zelmer Страницы: 54

Бренд: Sarowin Страницы: 8

Бренд: Paradyne Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды