Operation
SNMP Module
92
6.9.2 Restarting the SNMP Module
NOTICE
When restarting the SNMP module, the current configuration is saved in the permanent memory of the
SNMP module and the SNMP module will be restarted with the active configuration.
To perform a restart of the SNMP module, proceed as follows:
1. Select
Device > Advanced Service > Restart SNMP Board
in the menu bar.
An access window appears.
2. Enter the username and password of the administrator.
3. Click the
Ok
button.
Fig. 78
Management software dialog
Authentication required
A query to restart the SNMP module appears.
4. Click the
Yes
button to restart the SNMP module.
Fig. 79
Management software dialog
Restart SNMP Board
The current configuration is saved in the permanent memory of the SNMP module and the SNMP
module will be restarted.