12V
Network Setup
Device Name
Save
Current Network:
View Network Details
This name will be displayed when selecting your speaker from a list
of available AirPlay devices.
Connect the iW2 speaker to the same network as your AirPlay
source (iTunes, iPad, iPhone, or iPod touch(.
iHome iW2
Available Networks
http://192.168.1.12
Join Network
Customize the
name of your speaker
Select your Wi-Fi
network from list
30-120s
15s
4
5
6
10
English
Wi-Fi Network Setup continued...
To connect your iW2 speaker to a Wi-Fi network using a Mac or PC,
follow these steps:
1. Connect AC power and power ON iW2 speaker.
2. Press and hold (5 sec.) Network Setup button on the back of
unit.
Note:
The Network Status LED will begin flashing green and the top
control panel will also flash.
3. On your Mac or PC, select the network called "iHome Setup ######"
from Wi-Fi network settings.
Note:
This process can take up to 2 minutes. Be patient and refresh your
network list if necessary.
4. Launch a web browser (ex. Safari, Chrome, or Firefox) and enter
http://192.168.1.12
in the address bar.
Note:
If the page is not initially available or becomes unresponsive,
reload the page. See “troubleshooting” if problem persists.
5. Rename the iW2 speaker and click ‘Save’. (optional)
6. Select preferred Wi-Fi network from the list of available and click
‘Join Network’.
Note:
Connecting to a network may take up to 120 seconds. If network
connection is unsuccessful reset the unit or disconnect your iOS device
and reconnect and repeat the above steps.
Success!
1. Verify that the Network Status LED is green to confirm if the iW2 is
successfully connected to a network.
2. Disconnect from “iHome Setup ######” from your Wi-Fi network
setting and connect your Mac/PC to the same network you
connected the iW2 speaker.
3. Keep reading to learn how to use the iW2 and control your iTunes
and iOS audio content.
Note:
To begin using AirPlay wireless streaming, your AirPlay source
devices must be connected to the same Wi-Fi network to which your
iW2 speaker is connected.
Option B - Connecting with your Mac or PC over Wi-Fi
Problem?
Reset the iW2 Speaker:
- Unplug & reconnect the AC power cable from back of the
iW2 speaker
- Press & hold power button (3 seconds)
- Repeat iW2 Network Setup process if necessary
- See
Troubleshooting
on page 13-16 for other tips.
Connected
Not Connected
1
2
3
upper right corner of
Mac screen
lower right corner of
PC Screen
30s
30s
AirPort: On
Turn AirPort Off
Your Wi-Fi network
Another network
Another network
iHome Setup ######
Join Other Network...
Create Network...
Open Network Preferences...
YOUR Wi-Fi NETWORK
iHome Setup ######
Open Network and Sharing Center
9:42
01/15/2011
Internet access
Connect
Information sent over this network
might be visible to others.
Currently connected to:
press & hold power button (3 seconds)
to power ON iW2
network setup
status
power
network setup
status
network setup
status
Содержание iW2 air series
Страница 20: ...www ihomeaudio com ...
