iBT52
Instruction manual
Meet Your iBT52
iBT52 Home Docking Station
iBT52 Bluetooth Receiver
Introduction
Thank you for purchasing the iHome iBT52. This product is designed to provide
high quality wireless sound and speakerphone capability to audio devices
equipped with line-in jacks, and to headphones.
Along with the included Quick Bluetooth Connection Guide this instruction booklet
explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.
Maintenance
• Keep unit away from sources of excessive heat.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials can damage the
surface of the unit.
Included
• iBT52 Bluetooth receiver system
(Bluetooth Re docking station with USB + audio cable)
• iBT52 Home Docking Station (with attached Aux + Micro USB cable)
• USB Wall Adaptor
• 3.5mm to RCA cable adapter
Using Bluetooth: Pairing Your Device
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as
described in the device’s user manual.
2. Move the
Power On/Off Switch
on the Bluetooth Receiver to the ON position
(right) and wait 3 seconds. The unit will turn on and attempt to auto link to the
last previously paired device for 10 seconds, indicated by the
Button/Indicator Light
on the front of the Receiver flashing blue. If a linked
device is found, the indicator will flash blue twice every 7 seconds.
3. If no linked device is found, the unit will enter pairing mode, indicated by the
Button/Indicator Light
on the front of the Receiver flashing blue and red
while the unit attempts to pair.
NOTE:
If the unit is charging while pairing is
attempted, the light will continue to blink blue and red. “iHome iBT52” should
appear on your device’s menu. If “Not Paired”, “Not Connected” or similar
appears on your display, select “iHome iBT52” to complete pairing. If your
device asks for a password, enter
0000
on the keyboard of your device. If no
device is paired within 10 minutes, the unit will revert to auto link mode. To retry
pairing, move the
Power On/Off Switch
to the OFF position (left) then move it
back to the Bluetooth position (right) and wait 3 seconds.
4. Once paired with a device, the
Button/Indicator Light
on the front of the
Receiver will flash blue twice every 7 seconds. There should be an indication
on your device that pairing is complete. On some devices, you must then select
“Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired,
your device should link to the iBT52 whenever within range.
Pairing with a Different Device
1. When you power ON the Receiver, it will automatically link with the last
previously paired Bluetooth device as long as that device is still within range
(about 30 feet). So, to pair with a different device you must activate pairing
mode. To do so press and hold the
Button
for 6 seconds. The
Button/Indicator Light
flashes blue and red indicating pairing mode.
Connecting Audio Source to
Bluetooth Receiver
1. Connect the audio cable on the Docking Station
to your desired speaker or audio device’s line in
jack. For portable use, connect headphones or
an audio cable connected to a speaker or
audio device to the Aux-out Jack on the
Bluetooth Receiver (receiver must be charged).
Powering and Charging the Unit
Using the USB Wall Adaptor
1. Gently connect the Bluetooth Receiver to the Docking Station’s micro USB plug
and audio plug by sliding the Receiver onto the plugs.
2. Connect the standard USB plug of the Docking Station into the USB Wall
Adaptor.
3. Plug the USB Wall Adaptor into a working wall outlet. For first time use, charge
unit for about 3 hours.
Using other USB Power Source
1. Gently but firmly connect the Bluetooth Receiver to the Docking Station’s micro
USB plug and audio plug by lining up the sport clip with the groove on the
Docking Station and sliding the Receiver onto the plugs.
2. Connect the standard USB plug of the Docking Station into a power USB port
on a computer or other USB charging device. For first time use, charge unit for
about 3 hours.
The
Button/Indicator Light
on the front of the Bluetooth Receiver glows red
steadily while the unit is charging and turns OFF once the unit is fully charged.
If unit is not powered on and is connected to USB power, the red light glows
steadily to indicate unit is charging.
NOTE: When the unit is on and not connected to a power source, the Button/
Indicator Light flashing red means the battery needs charging.
Portable USB
Bluetooth Receiver
Top
Front
Front
Side
Side
Micro USB
Plug
Audio Plug
Sport Clip
Backlit Pairing/Operation
Button with Indicator Light
Microphone
Aux-in
2. Move the
Power On/Off Switch
to the ON position (right) and wait 3 seconds
to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or
other Bluetooth device.
The
Button/Indicator Light
on the Receiver will flash blue as the unit searches
for a previously paired device, and then flash blue twice every 7 seconds once
a previously paired device is detected.
3. Press the
Button
to play or pause tracks. Use the controls on your device to
navigate tracks and control volume from your Bluetooth device.
4. When done listening, move the
Power On/Off Switch
to the OFF position (left)
to turn the unit off.
Connecting Receiver to Speaker Using Aux Out
While the Bluetooth Receiver is docked in the Docking Station, you can connect
the Docking Station to any external speaker or audio device with a speaker and
aux/line-in jack via the Aux-out cable attached to the Docking Station.
You can also connect the Bluetooth Receiver directly by connecting a standard
3.5mm stereo audio cable to the Aux-out jack on the Bluetooth Receiver and the
other end into the desired Line-in jack.
1. Connect a
3.5 mm audio cable plug to the Aux-out jack on back of the unit
and connect the other end to the line-in jack on your external speaker. Note that
the aux output signal is stereo.
2. Move the
Power On/Off Switch
to the ON position (right) to listen to audio via
the selected mode.
3. Power on the audio device and use the controls on the device to navigate
tracks and control volume. Press the
Button
to play or pause tracks.
4. When done listening, move the
Power On/Off Switch
to the OFF position (left)
to turn the unit off. Remember to turn off your audio device, too.
usb
charging
DC 12V
2.5A
Micro USB Charging Port
Aux-out Jack
off
/
on
USB 2.0
Using the USB Wall Adaptor
Using the USB Power Source
to speaker
to speaker
to power source
iBT52 IB (Eng) US ver.
Size: 300mm x 260mm
Printing color: 1C +1C (Black)
May 2, 2013
(Front)
