Setting up Antenna
1. Plug the AM antenna cable into the
AM Loop Antenna Socket
on the back of unit. Move antenna 12” away from unit
for best reception.
2. Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press
the
Radio Button
to select radio play mode. Press as needed to select AM, FM1 or FM2 radio band.
2. Press
<<
or
>> Button
to tune radio to a desired station.
3. To memorize the current station as a preset, press and hold
Preset Button
1, 2, 3 or 4. Repeat step 1-3 to preset up
to 12 stations (4 AM and 8 FM). To listen to a preset station at any time, simply press the desired preset button.
4. Press
the
and
Volume– Button
on the iH12 or on the remote control to adjust the system volume.
5. To turn off the unit, press the
Alarm Reset/Power On/Off Button
on the iH12 or on the remote control to turn it off.
During normal operation, press and hold the
Wake-to Button
to set button click sound on or off. After the display shows
“CLC”, press
<<
or
>> Button
to set click sound on or off, then wait around 5 seconds to exit the setting mode.
8
Listening to Radio
Sleep mode lets you sleep to your iPod or the radio, gradually lowering the volume until the unit shuts off at the selected
time.
1. Press
the
Sleep Button
to enter sleep mode. The
Sleep Icon
will appear on the display to indicate the unit is in sleep
mode. The unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep feature which gradually
lowers the volume 15 seconds before auto power off.
2. You can adjust the sleep timer from 120, 90, 60, 30 or 15 minutes by pressing the
Sleep Button
again.
3. When the display changes back to show the real time, press the
Sleep Button
once to show the sleep time remaining.
Pressing it again will change the sleep time to the next lowest increment.
4. The iH12 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the
alarm volume. Press the
and
Volume– Button
on main unit or remote control to adjust the sleep volume. The
sleep volume will remain at that level the next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the
Alarm Reset/Power On/Off Button
on the iH12 or on the remote control to
turn it off.
Sleep Operation
Click Sound Operation
Repeatedly press the
3D Button
on the remote to set 3D wide sound effect on or off, then wait around 5 seconds to exit the
setting mode.
3D Sound Operation