background image

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this 

product to be free from defects in workmanship and materials, under normal use and conditions, 

for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store 

where it was originally purchased. Should this fail to resolve the matter and service still be required 

by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, 

replace this product without charge. This decision is subject to verification of the defect or 

malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer 

Service. The product must include proof of purchase, including date of purchase. An out-of-warranty 

fee for service will be charged for units that are received without proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh 

ones, as exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
1.   Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address  

 

of the Factory Service Center. 

2.   Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  

 

SDI is not responsible for damage that occurs during shipping to the Factory Service Center.

3.   Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date  

 

of purchase, if within the warranty period. Also include your name and address information, a  

 

brief description for why the unit is being returned, and the return authorization number. No  

 

unit can be processed without a return authorization  number.

4.   Write the return authorization number on the side of the shipping package and send the unit  

 

prepaid and insured to the Factory Service Center address authorized by SDI Customer   

 Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. 

It does not cover (i) products which have been damaged by negligence or willful actions, misuse 

or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or 

broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s 

or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center 

and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the 

product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, 

resellers, their officers, directors, 
shareholders, members or agents be liable to you or any third party for any consequential or 

incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not 

allow limitations on implied warranties or exclusion of consequential damages, so these restrictions 

may not apply to you.) This warranty gives you specific legal rights, and you may also have other 

rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned 

disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, 

cashier's check, or credit card) for purchase of your SDI product.

© 2014 SDI Technologies, Inc. All rights reserved

Questions? Visit www.ihome.com 

or call 1-800-288-2792 Toll Free

Limited 1 Year Warranty Information

Printed in China

iBT66-032114-B

A Consumer Guide to Product Safety

When used in the directed manner, this unit has been designed and manufactured to ensure 

your personal safety.  However, improper use can result in potential electrical shock or fire hazards. 

Please read all safety and operating instructions carefully before installation and use, and keep 

these instructions handy for future reference. Take special note of all warnings listed in these 

instructions and on the unit.

1.   

Water and Moisture

 – The unit should not be used near water. For example: near a 

bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 

2.   

Ventilation

 – The unit should be situated so that its location or position does not interfere 

with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or 

similar surface that may block ventilation openings.  Also, it should not be placed in a built-in 

installation, such as a bookcase or cabinet, which may impede the flow of air through the 

ventilation openings.

3.   

Heat

 – The unit should be situated away from heat sources such as radiators, heat registers, 

stoves or other appliances (including amplifiers) that produce heat.

4.   

Power Sources

 – The unit should be connected to a power supply only of the type 

described in the operating instructions or as marked on the appliance.

5.   

Power-Cable Protection

 – Power supply cables should be routed so that they are not 

likely to be walked on or pinched by items placed upon or against them.  It is always best 

to have a clear area from where the cable exits the unit to where it is plugged into an AC 

socket.

6.   

Cleaning

 – The unit should be cleaned only as recommended.  See the Maintenance 

section of this manual for cleaning instructions.

7.  

Objects and Liquid Entry

 – Care should be taken so that objects do not fall and liquids 

are not spilled into any openings or vents located on the product.

8.  

Attachments

 – Do not use attachments not recommended by the product manufacturer.

9.  

Lightning and Power Surge Protection

 – Unplug the unit from the wall socket and 

disconnect the antenna or cable system during a lightning storm or when it is left unattended 

and unused for long periods of time. This will prevent damage to the product due to lightning 

and power-line surges.

10. 

Overloading

 – Do not overload wall sockets, extension cords, or integral convenience 

receptacles as this can result in a risk of fire or electric shock.

11. 

Damage Requiring Service

 – The unit should be serviced by qualified service personnel 

when:

 

 A.  the power supply cable or plug has been damaged.

 

 B.  objects have fallen into or liquid has been spilled into the enclosure.

 

 C.  the unit has been exposed to rain.

 

 D.  the unit has been dropped or the enclosure damaged.

 

 E.  the unit exhibits a marked change in performance or does not operate normally.

12. 

Periods of Nonuse

 – If the unit is to be left unused for an extended period of time, such 

as a month or longer, the power cable should be unplugged from the unit to prevent damage 

or  corrosion.

13. 

Servicing

 – The user should not attempt to service the unit beyond those methods described 

in the user’s operating instructions.  Service methods not covered in the operating instructions 

should be referred to qualified service personnel.

 

•  Place the unit on a level surface away from sources of direct sunlight or excessive heat.

•  Protect your furniture when placing your unit on a natural wood and lacquered finish. A 

cloth or other protective material should be placed between it and the furniture.

•  Clean your unit with a soft cloth moistened only with mild soap and water. Stronger 

cleaning agents such as thinner or similar materials can damage the surface of the unit.

Maintenance

For Models That Use Lithium Batteries: 

•  Lithium batteries can explode or cause burns if disassembled, shorted, recharged,  
 

exposed to water, fire, or high temperatures & not handled appropriately

•   Do not place loose batteries in a pocket, purse, or other container containing metal 
 

objects, do not mix with used or other battery types, or store with hazardous or 

 

combustible materials.  

•   Store in cool, dry, ventilated area. 
•   Follow applicable laws and regulations for transport and disposal.

FCC ID:EMOIBT66

FCC IC:986B-IBT66

Model: iBT66 (Front) - Revised
IB (English) 
Size: 324Wmm x 184Hmm
Color: Print  in Black color
Date: Mar. 21, 14.

IMPORTANT

Read before proceeding
If you have any question regarding the operation or use of this product, please visit 

www.ihome.com 

to view answers to frequently asked questions.
To learn more about this and other iHome products, please visit us online at 

www.ihome.com

Questions? Visit www.ihome.com

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to 

the following two conditions: 

(1)  this device may not cause interference, and 

(2)  this device must accept any interference, including interference that may cause undesired 

  

operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and 

compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and 

compliance.

•   Warning: Changes or modifications to this unit not expressly approved by the party responsible  
 

for compliance could void the user’s authority to operate the equipment.

•   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 
 

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or more of 
the following measures:
•   Reorient or relocate the receiving antenna.
•   Increase the separation between the equipment and receiver.
•   Connect the equipment into an outlet on a circuit different from that to which the receiver is 
 connected.
•   Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)

This device complies with Part 15 of the FCC Rules, operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.

FCC Information
FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 

environment. This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter.

Model iBT66

GlowTunes Bluetooth

     

 Rechargeable 

Mini Speaker

CHARGE

BEFORE

USE

Отзывы: